Dell PowerEdge M420 8/4 Gbps FC SAN Module Administrator's Guide - Page 38
Enabling and disabling Failback for a port group, command to enable failback on a port group.
View all Dell PowerEdge M420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
3 Enabling and disabling Failback for a port group Use the following steps to enable or disable Failback policy on all the external ports (N_Ports) belonging to the same port group. 1. Connect to the FC SAN Module and log in using an account assigned to the admin role. 2. Use the following commands to enable or disable Failback for a port group: • Enter the ag --failbackenable pg pgid command to enable failback on a port group. switch:admin> ag --failbackenable -pg 3 Failback policy is enabled for port group 3 • Enter the ag --failbackdisable pg pgid command to disable failback on a port group. switch:admin> ag --failbackdisable -pg 3 Failback policy is disabled for port group 3 24 Dell 8/4Gbps FC SAN Module Administrator's Guide 53-1001345-01