Dell PowerEdge M420 8/4 Gbps FC SAN Module Administrator's Guide - Page 55
no chassis permissions
View all Dell PowerEdge M420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
configDownload B Examples "file" A file name in quotation marks, for example, "config.txt". This parameter can be used only with the -local or -USB option, each of which retrieves files from a predetermined directory on the local chassis or on an attached USB device. Therefore, subdirectories and absolute path names are not permitted. To download the switch configuration file interactively to the current logical switch from a local directory (no chassis permissions): switch:admin> configdownload Protocol (scp, ftp, local) [ftp]: Server Name or IP Address [host]: 192.168.163.233 User Name [user]: admin Path/Filename [/config.txt]: Section (all|chassis|FID# [all]): *** CAUTION *** This command is used to download a backed-up configuration for a specific switch. If using a file from a different switch, this file's configuration settings will override any current switch settings. Downloading a configuration file, which was uploaded from a different type of switch, may cause this switch to fail. A switch reboot might be required for some parameter changes to take effect. configDownload operation may take several minutes to complete for large files. Do you want to continue [y/n]: y Password: Activating configDownload: Switch is disabled configDownload complete: All config parameters are downloaded To download the switch configuration data to the current logical switch from an external FTP server (no chassis permissions): switch:admin> configdownload -ftp 192.168.38.245,jdoe,config.txt,password To download all system configuration data for the chassis and all logical switches (requires chassis permissions): switch:admin> configdownload -all -ftp 192.168.38.245,jdoe,config.txt,password To download the switch configurations to a logical switch with FID 8 from an attached USB device (requires chassis permissions): switch:admin> configdownload -fid 8 -USB config.txt To download the switch configurations belonging to a logical switch with FID 4 to a logical switch with FID 8 from an attached USB device (requires chassis permissions): switch:admin> configdownload -fid 8 -sfid 4 -USB config_fid8.txt To download the Virtual Fabric configuration file using FTP: switch:admin> configdownload -vf -p ftp 10.32.248.119,jdoe,/temp/switch-conf_66.txt,mypassword Dell 8/4Gbps FC SAN Module Administrator's Guide 41 53-1001345-01