Dell PowerEdge M420 8/4 Gbps FC SAN Module Administrator's Guide - Page 40
Verifying the switch mode, Before connecting the FC SAN Module to Brocade switches
View all Dell PowerEdge M420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
4 Fabric and Edge switch configuration • If DCC security is being used on Edge switches that directly connect to the FC SAN Module, make sure to include the module WWN or the port WWN of the external ports (N_Ports). Also include the HBA WWNs that will be connected to internal ports (F_Ports) to the ACL list in the ACL policy. It is recommended to use FC SAN Module ADS policy instead of the DCC policy on the Edge switch. • Allow inband queries for forwarded fabric management requests from the hosts. Add the FC SAN Module WWN to the access list if inband queries are restricted. Before connecting the FC SAN Module to Brocade switches, disable the Brocade Fabric OS Management Server Platform Service to get accurate statistical and configuration fabric data, Verifying the switch mode 1. Connect to the switch and log in using an account assigned to the admin role. 2. Enter the switchShow command to display the current switch configuration. The following example shows a switch in the Fabric OS Native mode where switchMode displays as Native. switch:admin> switchshow switchName: switch switchType: 43.2 switchState: Online switchMode: Native switchRole: Principal switchDomain: 1 switchId: fffc01 switchWwn: 10:00:00:05:1e:03:4b:e7 zoning: OFF switchBeacon: OFF Area Port Media Speed State Proto 0 0 -- N4 No_Module 1 1 cu N4 Online F-Port 50:06:0b:00:00:3c:b7:32 2 2 cu N4 Online F-Port 10:00:00:00:c9:35:43:f5 3 3 cu AN No_Sync 4 4 cu AN No_Sync Disabled (Persistent) 5 5 cu N4 Online F-Port 50:06:0b:00:00:3c:b4:3e 6 6 cu N4 Online F-Port 10:00:00:00:c9:35:43:f3 7 7 cu AN No_Sync Disabled (Persistent) 8 8 cu AN No_Sync 9 9 cu AN No_Sync Disabled (Persistent) 10 10 cu AN No_Sync Disabled (Persistent) 11 11 cu AN No_Sync Disabled (Persistent) 12 12 cu AN No_Sync Disabled (Persistent) 13 13 cu AN No_Sync Disabled (Persistent) 14 14 cu AN No_Sync Disabled (Persistent) 15 15 cu AN No_Sync Disabled (Persistent) 16 16 cu AN No_Sync Disabled (Persistent) 17 17 -- N4 No_Module 18 18 -- N4 No_Module 19 19 -- N4 No_Module 20 20 -- N4 No_Module 21 21 id N4 Online E-Port segmented,(zone conflict)(Trunk master) 22 22 id N4 Online E-Port (Trunk port, master is Port 21 ) 26 Dell 8/4Gbps FC SAN Module Administrator's Guide 53-1001345-01