Dell PowerEdge T40 EMC Installation and Service Manual - Page 33
Recommended tools, System cover, Removing the system cover
![]() |
View all Dell PowerEdge T40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Recommended tools You need the following tools to perform the removal and installation procedures: • Phillips #1 screwdriver • Phillips #2 screwdriver • Torx #T15 screwdriver • 5mm hex nut screwdriver • Plastic scribe • Wrist grounding strap connected to the ground • ESD mat System cover Removing the system cover Prerequisites 1. Follow the safety guidelines listed in Safety instructions. Steps 1. Pull the system cover release latch. 2. Remove the system cover. Installing and removing system components 33
![](/manual_guide/products/dell-poweredge-t40-emc-installation-service-manual-3780a21/33.png)
Recommended tools
You need the following tools to perform the removal and installation procedures:
•
Phillips #1 screwdriver
•
Phillips #2 screwdriver
•
Torx #T15 screwdriver
•
5mm hex nut screwdriver
•
Plastic scribe
•
Wrist grounding strap connected to the ground
•
ESD mat
System cover
Removing the system cover
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
.
Steps
1.
Pull the system cover release latch.
2.
Remove the system cover.
Installing and removing system components
33