Dell PowerEdge T40 EMC Installation and Service Manual - Page 62
Installing intrusion switch
View all Dell PowerEdge T40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Figure 41. Removing intrusion switch Next steps Replace the intrusion switch. Installing intrusion switch Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Follow the procedure that is listed in Before working inside your system. Steps 1. Align and slide the intrusion switch into the slot in the system. 2. Connect the intrusion switch cable to the connector on the system board. 3. Route the intrusion switch cable through the cable routing clips. Figure 42. Installing the intrusion switch 62 Installing and removing system components
Figure 41. Removing intrusion switch
Next steps
Replace the intrusion switch
.
Installing intrusion switch
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
.
2.
Follow the procedure that is listed in
Before working inside your system
.
Steps
1.
Align and slide the intrusion switch into the slot in the system.
2.
Connect the intrusion switch cable to the connector on the system board.
3.
Route the intrusion switch cable through the cable routing clips.
Figure 42. Installing the intrusion switch
62
Installing and removing system components