Dell PowerEdge T40 EMC Installation and Service Manual - Page 82
Expansion card specifications, Memory specifications, Storage controller specifications, Drives
View all Dell PowerEdge T40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Expansion card specifications The PowerEdge T40 system supports up to three PCI express (PCIe) Generation 3 and once PCI card. Table 25. Expansion card slots supported on the system board PCIe slot Slot 1 Slot 2 Slot 3 Slot 4 Slot Type PCIe x16 Gen3 PCI PCIe x4 Gen 3 (open ended) PCIe x4 Gen 3 (open ended) Processor Connection Processor Platform Controller Hub Platform Controller Hub Platform Controller Hub PCIe slot height Full Height Full Height Full Height Full Height Maximum Add-in Card Length Half length Half length Half length Half length NOTE: The expansion cards are not hot swappable. Memory specifications CAUTION: Dell recommends you to use ECC DIMMs to minimize the risk of uncorrectable system error, data loss and/or silent data corruption. Non-ECC DIMM is not used for mission-critical applications. NOTE: Non-ECC DIMMs are supported only in selected countries, for more information contact your sales representative. Table 26. Memory specifications DIMM Type UDIMM, DDR4, ECC/Non-ECC DIMM capacity 8 GB 16 GB Minimum RAM 8 GB 16 GB Maximum RAM 32 GB 64 GB Table 27. Memory module sockets Memory module sockets Four 288-pin Speed 2666 MT/s NOTE: Memory speed maybe downgraded from 2666 MT/s to 2133 MT/s based on processor capability. Storage controller specifications The PowerEdge T40 system supports Intel Virtual RAID on CPU (Intel VROC) software RAID. NOTE: Intel VROC supports RAID modes 0, 1, 5, and 10. NOTE: The PowerEdge T40 system does not support RAID 10 as RAID 10 is supported only on systems with 4 drives. Drive specifications Drives The PowerEdge T40 system supports the following drive configurations: 82 Technical specifications