Dell PowerEdge T40 EMC Installation and Service Manual - Page 35

Front bezel, Removing the front bezel

Page 35 highlights

Figure 11. Installing the system cover Next steps 1. Reconnect the peripherals and connect the system to an electrical outlet. 2. Power on the system, including attached peripherals. Front bezel Removing the front bezel Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Follow the procedure that is listed in Before working inside your system. Steps 1. Lift the retention clips at the edge of the bezel to release the bezel from the system. 2. Unhook the bezel tabs and pull the bezel away from the system. Installing and removing system components 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95

Figure 11. Installing the system cover
Next steps
1.
Reconnect the peripherals and connect the system to an electrical outlet.
2.
Power on the system, including attached peripherals.
Front bezel
Removing the front bezel
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
.
2.
Follow the procedure that is listed in
Before working inside your system
.
Steps
1.
Lift the retention clips at the edge of the bezel to release the bezel from the system.
2.
Unhook the bezel tabs and pull the bezel away from the system.
Installing and removing system components
35