Dell PowerEdge T40 EMC Installation and Service Manual - Page 38
Installing a drive carrier into the drive bay
View all Dell PowerEdge T40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
CAUTION: Mixing drive carriers from previous generations of PowerEdge servers is not supported. Steps Press the retention clips and lift the drive carrier out from the drive bay. Figure 14. Removing the hard drive carrier Next steps 1. Replace the drive carrier into the drive bay. Installing a drive carrier into the drive bay Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Follow the procedure that is listed in Before working inside your system. Steps Align and slide the drive carrier into the drive bay until it clicks into place. 38 Installing and removing system components
CAUTION:
Mixing drive carriers from previous generations of PowerEdge servers is not supported.
Steps
Press the retention clips and lift the drive carrier out from the drive bay.
Figure 14. Removing the hard drive carrier
Next steps
1.
Replace the drive carrier into the drive bay
.
Installing a drive carrier into the drive bay
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
.
2.
Follow the procedure that is listed in
Before working inside your system
.
Steps
Align and slide the drive carrier into the drive bay until it clicks into place.
38
Installing and removing system components