Dell PowerStore 9000X EMC PowerStore Alerts and Events Reference Guide - Page 50
The WWN-Seed or Dell
View all Dell PowerStore 9000X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Alert and Event Messages Event code Severity Alert raised Call home 0x0030BA01 NONE FALSE FALSE 0x0030BA02 MAJOR TRUE TRUE 0x0030BA03 CRITICAL TRUE TRUE 0x0030BB01 INFO 0x0030BB02 INFO 0x0030BB03 INFO 0x0030BC01 NONE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE 0x0030BC02 NONE FALSE FALSE 0x0030BF02 CRITICAL TRUE TRUE 0x0030C101 NONE FALSE FALSE 0x0030C102 MAJOR TRUE TRUE Message Polling status of the internal M.2 boot module in slot %(slot_num) has changed from %(old_value) to %(local_disk_polling_status ). Polling failed for internal M.2 boot module in slot %(slot_num). Root file system is readonly on internal M.2 boot module in slot %(slot_num). Device state was changed from %(old_value) to %(netdev_state). Device state was changed from %(old_value) to %(netdev_state). Device state was changed from %(old_value) to %(netdev_state). Bus %(bus_num) Enclosure %(encl_num) %(identification) has been replaced. Bus %(bus_num) Enclosure %(encl_num) %(identification) has been replaced. An unexpected firmware update has been detected. Contact your service provider immediately. BaseEnclosure perm_fields_resume_mism atch state has changed from %(old_value) to %(perm_fields_resume_mi smatch). The WWN-Seed or Dell Service Tag or Product Serial Number currently programmed on the Appliance Base Enclosure resume do not match the Repair flow - Try reseating the module. If the issue persists, replace the module. Refer to the Installation and Service Guide for more information. Try reseating the module. If the issue persists, replace the module. Refer to the Installation and Service Guide for more information. - - - - - Contact your service provider immediately. - Contact your service provider immediately. 50 Dell EMC PowerStore Events and Alerts Reference Guide System impact - The software may not reflect the up-to-date internal M.2 boot module health status. Root file system on the internal M.2 boot module is read-only. - - - - - - Knowledge Base Article - https://www.dell.com/support /Article/SLN317231 https://www.dell.com/support /Article/SLN317231 - https://www.dell.com/support /Article/SLN317238 - -