Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.0ER - Page 297
password, redistribute, Usage Information, Example, Supported Releases, Syntax, Parameters, Default
View all Dell PowerSwitch S4128F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 297 highlights
Usage Information Example Enable or disable outbound optimization dynamically to reset all neighbor sessions. When you enable outbound optimization, all peers receive the same update packets. The next-hop address chosen as one of the addresses of neighbor's reachable interfaces is also the same for the peers. The no version of this command disables outbound optimization. OS10(conf-router-bgp-10)# outbound-optimization Supported Releases 10.3.0E or later password Configures a password for message digest 5 (MD5) authentication on the TCP connection between two neighbors. Syntax Parameters Default Command Mode Usage Information Example password password password-Enter a password for authentication, up to 128 characters. Disabled ROUTER-NEIGHBOR All peers that inherit a template must authenticate peer sessions. The no version of this command disables authentication. OS10(conf-router-neighbor)# password myBGP Supported Releases 10.3.0E or later redistribute Redistributes connected, static, and OSPF routes in BGP. Syntax redistribute {connected [route-map map name] | ospf process-id | static [routemap map name ]} Parameters • connected - Enter to redistribute routes from physically connected interfaces. • route-map map name - (Optional) Enter the name of a configured route-map. • ospf process-id - Enter a number for the OSPF process (1 to 65535). • static - Enter to redistribute manually configured routes. Default Command Mode Usage Information Example (Connected) Disabled ROUTER-BGPv4-AF or ROUTER-BGPv6-AF Static routes are treated as incomplete routes. When you use the redistribute ospf process-id command without other parameters, the system redistributes all OSPF internal routes, external type 1 routes, and external type 2 routes. The no version of this command resets the value to the default. OS10(conf-router-bgp-102)# address-family ipv4 unicast OS10(conf-router-bgpv4-af)# redistribute connected route-map mapbgp1 Example (Static - OS10(conf-router-bgp-102)# address-family ipv4 unicast IPv4) OS10(conf-router-bgpv4-af)# redistribute static route-map mapbgp2 Layer 3 297