Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.0ER - Page 425
show vrrp, track, Usage Information, Example, Supported Releases, Syntax, Parameters, Default
View all Dell PowerSwitch S4128F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 425 highlights
Usage Information Example To guarantee that a VRRP group becomes master, configure the VRRP group's virtual address with same IP address as the interface's primary IP address, and change the priority of the VRRP group to 255. If you set this command to 255 and the virtual-address is not equal to the interface's primary IP address, the system displays an error message. The no version of this command resets the value to the default (100). OS10(conf-eth1/1/5-vrid-254)# priority 200 Supported Releases 10.2.0E or later show vrrp Displays VRRP group information. Syntax show vrrp {brief | vrrp-id | ipv6 group-id} Parameters • brief - Displays the configuration information for all VRRP instances in the system. • vrrp-id - Enter a VRRP group ID number to view the VRRP IPv4 group operational status information (1 to 255). • ipv6 group-id - (Optional) Enter a VRRP group ID number to view the specific IPv6 group operational status information (1 to 255). Default Command Mode Usage Information Example (Brief) All IPv4 VRRP group configuration EXEC Displays all active VRRP groups. If no VRRP groups are active, the system displays "No Active VRRP group.". OS10 # show vrrp brief Interface Group Priority Preemption State Master-addr Virtual addr(s) ethernet1/1/1 1 200 true master-state 10.1.1.1 10.1.1.1 Example (IPv6) OS10 # show vrrp ipv6 1 Interface : ethernet1/1/1 IPv6 VRID : 1 Primary IP Address : 10::1 State : master-state Virtual MAC Address : 00:00:5e:00:02:01 Version : version-3 Priority : 200 Preempt : Hold-time : Authentication : no-authentication Virtual IP address : 10::1 master-transitions : 1 advertise-rcvd : 0 advertise-interval-errors : 0 ip-ttl-errors : 0 priority-zero-pkts-rcvd : 0 priority-zero-pkts-sent : 0 invalid-type-pkts-rcvd : 0 address-list-errors : 0 pkt-length-errors : 0 Supported Releases 10.2.0E or later track Assigns a unique identifier to track an object. Syntax track track-id [priority cost [value]] Parameters • track-id - Enter the object tracking resource ID number (1 to 500). Layer 3 425