Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.0ER - Page 578
control-plane, flowcontrol
View all Dell PowerSwitch S4128F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 578 highlights
• interface ethernet node-id/slot/port-id [:subport] - Clears QoS statistics for an Ethernet interface configured for qos, queuing, or control-plane. Default Command Mode Usage Information Example Not configured EXEC None OS10# clear qos statistics type qos interface ethernet 1/1/5 Example (controlplane) Example (queuing) OS10# clear qos statistics type control-plane interface ethernet 1/1/7 OS10# clear qos statistics type queuing interface ethernet 1/1/2 Supported Releases 10.2.0E or later control-plane Enters Control-Plane mode. Syntax control-plane Parameters None Default Not configured Command Mode CONTROL-PLANE Usage Information If you attach an access-list to the class-map type of control-plane, the access-list ignores the permit and deny keywords. Example (class-map) OS10(config)# class-map type control-plane match-any c1 OS10(conf-cmap-control-plane)# Example (policymap) OS10(config)# policy-map type control-plane p1 OS10(conf-pmap-control-plane)# Supported Releases 10.2.0E or later flowcontrol Enables or disables link-level flow control on an interface. Syntax Parameters flowcontrol [receive | transmit] [on | off] • receive - (Optional) Indicates the port can receive flow control packets from a remote device. • transmit - (Optional) Indicates the local port can send flow control packets to a remote device. • on - (Optional) When used with receive, allows the local port to receive flow control traffic. When used with transmit, allows the local port to send flow control traffic to the remote device. • off - (Optional) When used with receive, disables the remote device from sending flow control traffic to the local port. When used with transmit, disables the local port from sending flow control traffic to the remote device. 578 Quality of service