Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.0ER - Page 393

Example OS10(config)# router ospfv3 OS10(config-router-ospfv3-100)# maximum-paths 1 Supported Releases 10.3.0E or later redistribute Redistributes information from another routing protocol or routing instance to the OSPFv3 process. Syntax redistribute {bgp as-number | connected | static} [route-map route-map name] Parameters • as-number - Enter an autonomous number to redistribute BGP routing information throughout the OSPFv3 instance (1 to 4294967295). • route-map name - Enter the name of a configured route-map. • connected - Enter the information from connected (active) routes on interfaces to redistribute. • static - Enter the information from static routes on interfaces redistribute. Defaults Command Mode Usage Information Example Not configured ROUTER-OSPFv3 When an OSPFv3 redistributes, the process is not completely removed from the BGP configuration. The no version of this command disables the redistribute configuration. OS10(config)# router ospfv3 100 OS10(config-router-ospfv3-100)# redistribute bgp 4 route-map dell1 Example (Connected) OS10((config-router-ospfv3-100)# redistribute connected route-map dell2 Supported Releases 10.3.0E or later router-id Configures a fixed router ID for the OSPFv3 process. Syntax router-id ip-address Parameters ip-address - Enter the IP address of the router as the router ID. Default Not configured Command Mode ROUTER-OSPFv3 Usage Information Configure an arbitrary value in the IP address format for each router. Each router ID must be unique. Use the fixed router ID for the active OSPFv3 router process. Changing the router ID brings down the existing OSPFv3 adjacency. The new router ID becomes effective immediatley. The no version of this command disables the router ID configuration. Example OS10(config)# router ospfv3 10 OS10(config-router-ospfv3-100)# router-id 10.10.1.5 Supported Releases 10.3.0E or later Layer 3 393