Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.0ER - Page 394

router ospfv3 Enters Router OSPFv3 mode and configures an OSPFv3 instance. Syntax router ospfv3 instance-number Parameters instance-number-Enter a router OSPFv3 instance number, from 1 to 65535. Default Not configured Command Mode CONFIGURATION Usage Information The no version of this command deletes an OSPFv3 instance. Example OS10(config)# router ospfv3 10 Supported Releases 10.3.0E or later show ipv6 ospf Displays OSPFv3 instance configuration information. Syntax Parameters Default Command Mode Usage Information Example show ipv6 ospf [instance-number] instance-number - (Optional) View OSPFv3 information for a specified instance number (1 to 65535) None EXEC None OS10# show ipv6 ospf Routing Process ospfv3 200 with ID 1.1.1.1 It is an Area Border Router Min LSA origination 5000 msec, Min LSA arrival 1000 msec Min LSA hold time 0 msec, Max LSA wait time 0 msec Number of area in this router is 2, normal 2 stub 0 nssa Area (0.0.0.0) Number of interface in this area is 1 SPF algorithm executed 42 times Area (0.0.0.1) Number of interface in this area is 1 SPF algorithm executed 42 times OS10# show ipv6 ospf 200 Routing Process ospfv3 200 with ID 10.0.0.2 Min LSA origination 5000 msec, Min LSA arrival 1000 msec Min LSA hold time 0 msec, Max LSA wait time 0 msec Number of area in this router is 1, normal 1 stub 0 nssa Area (0.0.0.0) Number of interface in this area is 1 SPF algorithm executed 3 times Supported Releases 10.3.0E or later show ipv6 ospf database Displays all LSA information. You must enable OSPFv3 to generate output. Syntax Parameters show ipv6 ospf process-id database process-id - Enter the OSPFv3 process ID to view a specific process. If you do not enter a process ID, the command applies to all the configured OSPFv3 processes. 394 Layer 3