Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.0ER - Page 376
show ip ospf topology, summary-address
View all Dell PowerSwitch S4128F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 376 highlights
Receive Statistics rx-invalid 0 rx-invalid-bytes rx-hello 0 rx-hello-bytes rx-db-des 0 rx-db-des-bytes rx-ls-req 0 rx-ls-req-bytes rx-ls-upd 0 rx-ls-upd-bytes rx-ls-ack 0 rx-ls-ack-bytes Transmit Statistics tx-failed 0 tx-failed-bytes tx-hello 0 tx-hello-bytes tx-db-des 0 tx-db-des-bytes tx-ls-req 0 tx-ls-req-bytes tx-ls-upd 0 tx-ls-upd-bytes tx-ls-ack 0 tx-ls-ack-bytes Error packets (Receive statistics) bad-src 0 dupe-id mtu-mismatch 0 nbr-ignored resource-err 0 bad-lsa-len lsa-bad-len 0 lsa-bad-cksum netmask-mismatch 0 hello-tmr-mismatch options-mismatch 0 nbr-admin-down self-orig 0 wrong-length version-mismatch 0 area-mismatch Supported Releases 10.2.0E or later 0 0 0 0 0 0 0 0 0 0 0 0 0 hello-err 0 0 wrong-proto 0 0 lsa-bad-type 0 0 auth-fail 0 0 dead-ivl-mismatch 0 0 own-hello-drop 0 0 checksum-error 0 0 show ip ospf topology Displays routers which are directly connected to OSPF areas. Syntax Parameters Default Command Mode Usage Information Example show ip ospf [process-id] topology process-id - (Optional) Displays OSPF process information. If you do not enter a process ID, this applies only to the first OSPF process. Not configured EXEC The "E" flag output indicates the router listed is an ASBR. The "B" flag indicates that the router listed is an area border router (ABR). If the Flag field shows both E and B, it indicates that the listed router is both an ASBR and an ABR. OS10# show ip ospf 10 topology Router ID 111.111.111.1 111.111.111.2 112.2.1.1 112.112.112.1 112.112.112.2 Flags -/B/-/ -/B/-/ E/-/-/ -/B/-/ -/B/-/ Cost 1 1 1 2 2 Nexthop 111.1.1.2 111.2.1.2 110.1.1.2 110.1.1.2 110.1.1.2 Interface Vl 3051 Vl 3053 Vl 3050 Vl 3050 Vl 3050 Area 0 0 0 0 0 Supported Releases 10.2.0E or later summary-address Configures a summary address for an ASBR to advertise one external route as an aggregate, for all redistributed routes covered by specified address range. Syntax summary-address ip-address/mask [not-advertise | tag tag-value] Parameters • ip-address/mask-Enter the IP address to be summarized along with the mask. • not-advertise-(Optional) Suppresses IP addresses that do not match the network prefix/mask. 376 Layer 3