Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.0ER - Page 471

radius-server timeout Configures the timeout used to resend RADIUS authentication requests. Syntax Parameters Default Command Mode Usage Information Example radius-server timeout seconds seconds - Enter the time in seconds for retransmission (0 to 1000). An OS10 switch stops sending RADIUS authentication requests after five seconds. CONFIGURATION Use this command to globally configure the timeout value used on RADIUS servers. The no version of this command resets the value to the default. OS10(config)# radius-server timeout 360 Supported Releases 10.2.0E or later radius-server vrf Configures RADIUS server for the management VRF instance. Syntax radius-server vrf management Parameters None Defaults Not configured Command Mode CONFIGURATION Usage Information The no version of this command removes the RADIUS server from the management VRF instance. Example OS10(config)# radius-server vrf management Supported Releases 10.4.0E(R1) or later show ip ssh Displays the SSH server information. Syntax Parameters Default Command Mode Usage Information Example show ip ssh None Not configured EXEC Use this command to view information about the established SSH sessions. OS10# show ip ssh SSH Server: Enabled SSH Server Ciphers: [email protected],aes128-ctr, aes192-ctr,aes256-ctr, [email protected],[email protected] SSH Server MACs: [email protected],[email protected], [email protected],hmac-sha2-512- System management 471