Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.0ER - Page 387
area stub, auto-cost reference-bandwidth, clear ipv6 ospf process, The value set by
![]() |
View all Dell PowerSwitch S4128F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 387 highlights
• All OSPFv3 routers in the area must share the same authentication key to exchange information. Only a nonencrypted key is supported. For MD5 authentication, the non-encrypted key must be 32 plain hex digits. For SHA-1 authentication, the non-encrypted key must be 40 hex digits. An encrypted key is not supported. Example OS10(config-router-ospfv3-100)# area 1 encryption ipsec spi 401 esp des 1234567812345678 md5 12345678123456781234567812345678 Supported Releases 10.4.0E(R1) or later area stub Defines an area as the OSPF stub area. Syntax Parameters area area-id stub [no-summary] • area-id-Set the OSPFv3 area ID as an IP address (A.B.C.D) or number (1 to 65535). • no-summary-(Optional) Prevents an area border router from sending summary link advertisements into the stub area. Default Command Mode Usage Information Example Not configured ROUTER-OSPFv3 The no version of this command deletes a stub area. OS10(config)# router ospfv3 10 OS10(conf-router-ospfv3-10)# area 10.10.1.5 stub Supported Releases 10.3.0E or later auto-cost reference-bandwidth Calculates default metrics for the interface based on the configured auto-cost reference bandwidth value. Syntax Parameters Default Command Mode Usage Information Example auto-cost reference-bandwidth value value - Enter the reference bandwidth value to calculate the OSPFv3 interface cost in megabits per second (1 to 4294967). 100000 ROUTER-OSPFv3 The value set by the ipv6 ospf cost command in INTERFACE mode overrides the cost resulting from the auto-cost command. The no version of this command resets the value to the default. OS10(config)# router ospfv3 100 OS10(config-router-ospfv3-100)# auto-cost reference-bandwidth 150 Supported Releases 10.3.0E or later clear ipv6 ospf process Clears all OSPFv3 routing tables. Syntax Parameters clear ipv6 ospf {instance-number} process instance-number - Enter an OSPFv3 instance number (1 to 65535). Layer 3 387
![](/manual_guide/products/dell-powerswitch-s3048on-os10-enterprise-edition-user-guide-release-1040er3-c44ef57/387.png)