Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.0ER - Page 453

System clock OS10 uses NTP to synchronize the system clock with a time-serving host. If you do not use NTP, set the system time in EXEC mode. The hardware-based real-clock time (RTC) is reset to the new system time. You can set the current time and date after you disable NTP. When NTP is enabled, it overwrites the system time. • Enter the time and date in EXEC mode. clock set time year-month-day Enter time in the format hour:minute:second, where hour is 1 to 24; minute is 1 to 60; second is 1 to 60 (enter 5:15 PM as 17:15:00). Enter year-month-day in the format YYYY-MM-DD, where YYYY is a four-digit year, such as 2016; MM is a month from 1 to 12; DD is a day from 1 to 31. Set time and date OS10# clock set 18:30:10 2017-01-25 View system time and date OS10# show clock 2017-01-25T18:30:17.92+00:00 System Clock commands clock set Sets the system time. Syntax clock set time year-month-day Parameters time Enter time in the format hour:minute:second, where hour is 1 to 24; minute is 1 to 60; second is 1 to 60. For example, enter 5:15 PM as 17:15:00. year-month-day Enter year-month-day in the format YYYY-MM-DD, where YYYY is a four-digit year, such as 2016; MM is a month from 1 to 12; DD is a day from 1 to 31. Default Command Mode Usage Information Example Not configured EXEC Use this command to reset the system time if the system clock is out of synch with the NTP time. The hardwarebased real-clock time (RTC) resets to the new time. The new system clock setting is applied immediately. OS10# clock set 18:30:10 2017-01-25 Supported Releases 10.2.1E or later System management 453