Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.0ER - Page 640

unknown-unicast-storm-control : Disabled multicast-storm-control : Disabled broadcast-storm-control : Disabled flow-control-rx : Disabled flow-control-tx : Disabled ets mode : Disabled Dot1p-tc-mapping : dot1p_map1 Dscp-tc-mapping : dscp_map1 tc-queue-mapping : tc-q-map1 View QoS maps: traffic-class to queue mapping OS10# show qos maps Traffic-Class to Queue Map: tc-q-map1 queue 0 qos-group 0 queue 1 qos-group 1 Traffic-Class to Queue Map: dot1p_map1 qos-group 0 dot1p 0-3 qos-group 1 dot1p 4-7 DSCP Priority to Traffic-Class Map : dscp_map1 qos-group 0 dscp 0-31 qos-group 1 dscp 32-63 ETS commands ets mode on Enables ETS on an interface. Syntax ets mode on Parameter None Default Disabled Command Mode INTERFACE Usage Information Enable ETS on all switch interfaces in SYSTEM-QOS mode or on an interface or interface range in INTERFACE mode. The no version of this command disables ETS. Example OS10(config-sys-qos)# ets mode on Supported Releases 10.3.0E or later Data center bridging eXchange DCBX allows a switch to automatically discover and set up DCBX-enabled peers configured with compatible settings. In a converged data center network, DCBX provides plug-and-play capability for server, storage, and networking devices in an end-to-end solution. DCBX uses LLDP to mediate the automatic negotiation and exchange of device settings, such as PFC and ETS. DCBX uses LLDP TLVs to perform DCB parameter exchange: • PFC configuration and application priority configuration • ETS configuration and ETS recommendation This sample DCBX topology shows two 40GbE ports on a switch that are configured as DCBX auto-upstream ports and used as uplinks to top-of-rack (ToR) switches. The top-of-rack (ToR) switches are part of a fibre channel storage network. 640 Converged data center services