Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.0ER - Page 99

! interface vlan10 no shutdown ! interface ethernet1/1/1 no shutdown switchport access vlan 10 ! interface ethernet1/1/2 no shutdown switchport access vlan 10 ! interface ethernet1/1/3 no shutdown switchport access vlan 10 ! interface ethernet1/1/4 no shutdown switchport access vlan 10 Supported Releases 10.4.0E(R1) or later description (Interface) Configures a textual description of an interface. Syntax Parameters Default Command Mode Usage Information description string string - Enter a text string for the interface description (up to 240 characters). Not configured INTERFACE • To use special characters as a part of the description string, enclose the string in double quotes. • Spaces between characters are not preserved after entering this command unless you enclose the entire description in quotation marks ("text description"). • Enter a text string after the description command to overwrite any previous text string that you previously configured as the description. • The shutdown and description commands are the only commands that you can configure on an interface that are a member of a port-channel. • Use the show running-configuration interface command to view descriptions configured for each interface. • The no version of this command deletes the description. Example OS10(conf-if-eth1/1/7)# description eth1/1/7 Supported Releases 10.2.0E or later duplex Configures duplex mode on the Management port. Syntax duplex {full | half | auto} Parameters • full - Specify to set the physical interface to transmit in both directions. Interfaces 99