Dell PowerSwitch S4820T Configuration Guide for the S4820T System 9.14.1.0 - Page 352

no disable Setting the FRRP Timers To set the FRRP timers, use the following command. NOTE: Set the Dead-Interval time 3 times the Hello-Interval. • Enter the desired intervals for Hello-Interval or Dead-Interval times. CONFIG-FRRP mode. timer {hello-interval|dead-interval} milliseconds - Hello-Interval: the range is from 50 to 2000, in increments of 50 (default is 500). - Dead-Interval: the range is from 50 to 6000, in increments of 50 (default is 1500). Clearing the FRRP Counters To clear the FRRP counters, use one of the following commands. • Clear the counters associated with this Ring ID. EXEC PRIVELEGED mode. clear frrp ring-id Ring ID: the range is from 1 to 255. • Clear the counters associated with all FRRP groups. EXEC PRIVELEGED mode. clear frrp Viewing the FRRP Configuration To view the configuration for the FRRP group, use the following command. • Show the configuration for this FRRP group. CONFIG-FRRP mode. show configuration Viewing the FRRP Information To view general FRRP information, use one of the following commands. • Show the information for the identified FRRP group. EXEC or EXEC PRIVELEGED mode. show frrp ring-id Ring ID: the range is from 1 to 255. • Show the state of all FRRP groups. EXEC or EXEC PRIVELEGED mode. 352 Force10 Resilient Ring Protocol (FRRP)