Dell PowerSwitch S4820T Configuration Guide for the S4820T System 9.14.1.0 - Page 894

Table 112. Global MIB Objects for Port Security MIB Object OID dellNetGlobalPortSecurityMode 1.3.6.1.4.1.6027.3.31.1.1.1 dellNetGlobalTotalSecureAddress 1.3.6.1.4.1.6027.3.31.1.1.2 dellNetGlobalClearSecureMacAd 1.3.6.1.4.1.6027.3.31.1.1.3 dresses dellNetGlobalResetViolationStatu 1.3.6.1.4.1.6027.3.31.1.1.4 s Access or Permission read-write read-only read-write read-write Description Enables or disables port security feature globally on the device. Displays the total number of MAC addresses learnt or configured in the device. Deletes all the secured MAC addresses in the system based on the specific type (sticky or dynamic). Resets the violation status (Err-disabled state) of all violated interfaces based on the specified type (MAC limit or station move violation). MIB support for interface level port security The MIB table dellNetPortSecIfConfigTable is used to achieve port security feature (MAC address learning limit) on an interface. NOTE: Port Security is not supported in VLT port channels. The following table shows the MIB objects of the table dellNetPortSecIfConfigTable. The OID of the MIB table is 1.3.6.1.4.1.6027.3.31.1.2.1. Table 113. Interface level MIB Objects for Port Security MIB Object OID dellNetPortSecIfPortSecurityEna 1.3.6.1.4.1.6027.3.31.1.2.1.1.1 ble dellNetPortSecIfPortSecuritySta 1.3.6.1.4.1.6027.3.31.1.2.1.1.2 tus dellNetPortSecIfSecureMacLimit 1.3.6.1.4.1.6027.3.31.1.2.1.1.3 dellNetPortSecIfCurrentMacCou 1.3.6.1.4.1.6027.3.31.1.2.1.1.4 nt dellNetPortSecIfStationMoveEn 1.3.6.1.4.1.6027.3.31.1.2.1.1.5 able dellNetPortSecIfSecureMacViola 1.3.6.1.4.1.6027.3.31.1.2.1.1.6 tionAction dellNetPortSecIfStmvViolationA 1.3.6.1.4.1.6027.3.31.1.2.1.1.7 ction Access or Permission read-only read-only read-write read-only read-write read-write read-write Description Specifies if the port security feature is enabled or disabled on an interface. Represents the port security status of an interface. Maximum number (N) of MAC addresses to be secured on the interface Current number of MAC addresses learnt or configured on this interface Enable or disable station movement on the dynamically secured MAC addresses learnt on the interface. Determines the action to be taken when MAC limit violation occurs in the system. Determines the action to be taken when either dynamic or static MAC limit violation occurs in the system. 894 Simple Network Management Protocol (SNMP)