Dell PowerSwitch S5212F-ON OS10 Enterprise Edition User Guide Release 10.4.3.0 - Page 106

Configure read-write view OS10(config)# snmp-server view rwView 1.3.6.1.2.1.31.1.1.1.6 included OS10(config)# snmp-server view rwView 1.3.6.1.2.1.31.0.0.0.0 excluded Display SNMP views OS10# show snmp-server view view name : readview OID : 1.3.6.5 excluded : True Configure SNMP groups Configure an SNMP group with the views allowed for the members of the group. Specify the read-only, read-write, and/or notification access to the SNMP agent. The security model corresponds to the SNMP version that users use to send and receive SNMP messages. The security level configures SNMPv3 user authentication and privacy settings: • auth - Authenticate users in SNMP messages. • noauth - Do not authenticate users or encrypt SNMP messages; send messages in plain text. • priv - Authenticate users and encrypt/decrypt SNMP messages. Enter an ACL to limit user access so that only messages from and to ACL-allowed users are received and sent from the SNMP agent on the switch. snmp-server group group-name {v1 | v2c | v3 security-level} [access acl-name] [read view-name] [write view-name] [notify view-name] To configure a view of the MIB tree on the SNMP agent, use the snmp-server view command. To configure an SNMPv3 user's authentication and privacy settings, use the snmp-server user command. To display the configured SNMP groups, use the show snmp group command. Configure SNMPv1 or v2c group OS10(config)# snmp-server group v2group 2c read readview notify GetsSets Configure SNMPv3 group OS10(config)# snmp-server group v3group 3 priv read readview write writeview notify alltraps Display SNMP groups OS10# show snmp-server group groupname : v2group version : 2c notifyview : GetsSets readview : readview groupname version security level notifyview readview writeview : v3group : 3 : priv : alltraps : readview : writeview 106 System management