Dell PowerSwitch S5212F-ON OS10 Enterprise Edition User Guide Release 10.4.3.0 - Page 994

Instead of PFC, you can configure LLFC as follows: NOS# configure terminal NOS(config)# class-map type network-qos llfc NOS(config-cmap-nqos)# match qos-group 0-7 NOS(config-cmap-nqos)# exit NOS(config)# policy-map type network-qos llfc NOS(config-pmap-network-qos)# class llfc NOS(config-pmap-c-nqos)# pause buffer-size 100 pause-threshold 50 resume-threshold 10 NOS(config-pmap-c-nqos)# end NOS# configure terminal NOS(config)# interface range ethernet 1/1/1,1/1/2,1/1/3 NOS(conf-range-eth1/1/1,1/1/2,1/1/3)# flowcontrol transmit on NOS(conf-range-eth1/1/1,1/1/2,1/1/3)# flowcontrol receive on NOS(conf-range-eth1/1/1,1/1/2,1/1/3)# service-policy input type network-qos llfc NOS(conf-range-eth1/1/1,1/1/2,1/1/3)# end WRED/ECN configuration - ToR device NOS# configure terminal NOS(config)# wred w1 NOS(config-wred)# random-detect ecn NOS(config-wred)# random-detect color green minimum-threshold 100 maximum-threshold 500 dropprobability 100 NOS(config-wred)# random-detect color yellow minimum-threshold 100 maximum-threshold 500 dropprobability 100 NOS(config-wred)# random-detect color red minimum-threshold 100 maximum-threshold 500 dropprobability 100 NOS(config-wred)# exit NOS(config)# class-map type queuing cq NOS(config-cmap-queuing)# match queue 5 NOS(config-cmap-queuing)# exit NOS(config)# policy-map type queuing pq NOS(config-pmap-queuing)# class cq NOS(config-pmap-c-que)# random-detect w1 NOS(config-pmap-c-que)# end NOS# configure terminal NOS(config)# interface range ethernet 1/1/1,1/1/2,1/1/3 NOS(conf-range-eth1/1/1,1/1/2,1/1/3)# flowcontrol receive off NOS(conf-range-eth1/1/1,1/1/2,1/1/3)# priority-flow-control mode on NOS(conf-range-eth1/1/1,1/1/2,1/1/3)# ets mode on NOS(conf-range-eth1/1/1,1/1/2,1/1/3)# service-policy input type network-qos policy5 NOS(conf-range-eth1/1/1,1/1/2,1/1/3)# service-policy output type queuing pq NOS(conf-range-eth1/1/1,1/1/2,1/1/3)# trust-map dot1p t1 NOS(conf-range-eth1/1/1,1/1/2,1/1/3)# end Enable DCBx - ToR device OS10# configure terminal OS10(config)# dcbx enable Buffer statistics tracking OS10 offers the Buffer Statistics Tracking (BST) feature to observe buffer usage across the switch without any impact to performance. This feature maintains separate sets of counters for buffer usage accounting: • Ingress priority-group • Ingress service-pool • Ingress shared-headroom-pool • Egress queue • Egress service-pool 994 Quality of service