Dell PowerSwitch S5212F-ON OS10 Enterprise Edition User Guide Release 10.4.3.0 - Page 999

control-plane Enters CONTROL-PLANE mode. Syntax control-plane Parameters None Default Not configured Command Mode CONTROL-PLANE Usage Information If you attach an access-list to the class-map type of control-plane, the access-list ignores the permit and deny keywords. Example (class-map) OS10(config)# class-map type control-plane match-any c1 OS10(conf-cmap-control-plane)# Example (policymap) OS10(config)# policy-map type control-plane p1 OS10(conf-pmap-control-plane)# Supported Releases 10.2.0E or later control-plane-buffer-size Configures the buffer size for the CPU pool. Syntax control-plane-buffer-size size-of-buffer-pool Parameters size-of-buffer-pool-Enter the buffer size in KB, from 620 KB to 900 KB. Default None Command Mode SYSTEM-QOS Usage Information This command configures the buffer size of the CPU pool. The system allocates a buffer size for the CPU pool from the total system buffer. A minimum guaranteed buffer is allocated for each of the CPU queues and the rest is available for shared usage. The size of the buffer pool varies based on the number of CPU queues and buffer usage by each queue, but it cannot be less than the aggregate of the minimum guaranteed buffer allocated for each of the CPU queues. The no version of this command removes the buffer size configured for the CPU pool and returns the buffer size to the default value, 620 KB. Example OS10(config-sys-qos)# control-plane-buffer-size 900 Supported Releases 10.4.2.0 and later flowcontrol Enables or disables link-level flow control on an interface. Syntax Parameters flowcontrol [receive | transmit] [on | off] • receive - (Optional) Indicates the port can receive flow control packets from a remote device. Quality of service 999