Dell PowerSwitch S5212F-ON OS10 Enterprise Edition User Guide Release 10.4.3.0 - Page 802

Parameters Default Command Mode Usage Information None Disabled EXEC • After you enable user re-authentication and change the authentication method or server, users are logged out of the switch and are prompted to log in again to re-authenticate. User re-authentication is triggered by: - Adding or removing a RADIUS server as a configured server host with the radius-server host command. - Adding or removing an authentication method with the aaa authentication [local | radius] command. • The no version of the command disables user re-authentication. Example OS10(config)# aaa re-authenticate enable Supported Releases 10.4.0E(R1) or later boot protect disable username Allows you to disable bootloader protection. Syntax boot protect disable username username Parameters None Default Disabled Command Mode EXEC Usage Information You can disable bootloader protection for each individual user. Example OS10# boot protect disable username root Supported Releases 10.4.3.0 or later boot protect enable username password Allows you to enable bootloader protection. Syntax Parameters boot protect enable username username password password • username - Enter the username to provide access to bootloader protection. • password - Enter a password for the specified username. Default Command Mode Usage Information Disabled EXEC You can enable bootloader protection by executing this command. You can configure a maximum of three username / password pairs for bootloader protection. 802 Security