Dell PowerSwitch S5212F-ON OS10 Enterprise Edition User Guide Release 10.4.3.0 - Page 64

alias (multi-line) Creates a mulit-line command alias. Syntax alias alias-name Parameters Default Command Mode Usage Information alias-name - Enter the name of the multi-line alias. A maximum of up to 20 characters. Not configured CONFIGURATION Use this command to save a series of multiple commands in an alias. The switch enters ALIAS mode when you create an alias. You can enter the series of commands to be executed using the line command. The no version of this command deletes an alias. Example OS10(config)# alias mTest OS10(config-alias-mTest)# line 1 "interface $1 $2" OS10(config-alias-mTest)# line 2 "no shutdown" OS10(config-alias-mTest)# line 3 "show configuration" Supported Releases 10.4.0E(R1) or later batch Executes a series of commands in a file in batch, non-interactive, processing. Syntax Parameters batch /home/username/filename • username - Enter the user name that was used to copy the command file. • filename - Enter the name of a batch command file. Default Command Mode Usage Information Example Not configured EXEC Use this command to create a batch command file on a remote machine. Copy the command file to the home directory on your switch. This command executes commands in batch mode. OS10 automatically commits all commands in a batch file; you do not have to enter the commit command. To display the files stored in the home directory, enter dir home. Use the dir home command to view the files stored in the home directory. batch /home/admin/b.cmd Jun 26 18:29:12 OS10 dn_l3_core_services[723]: Node.1-Unit.1:PRI:notice [os10:trap], %Dell EMC (OS10) %log-notice:IP_ADDRESS_ADD: IP Address add is successful. IP 172.17.4.1/24 in VRF:default added successfully Supported Releases 10.2.0E or later 64 Getting Started