Dell PowerSwitch S5212F-ON OS10 Enterprise Edition User Guide Release 10.4.3.0 - Page 449

View fast external fallover unconfiguration OS10(config-router-bgp-300)# do show running-configuration bgp ! router bgp 300 no fast-external-fallover ! neighbor 3.1.1.1 remote-as 100 no shutdown ! neighbor 3::1 remote-as 100 no shutdown ! address-family ipv6 unicast activate OS10(config-router-bgp-300)# OS10(conf-if-eth1/1/1)# do clear ip bgp * OS10# show ip bgp summary BGP router identifier 11.11.11.11 local AS number 300 Neighbor AS MsgRcvd MsgSent Up/Down State/Pfx 3.1.1.1 100 7 4 00:00:08 3 3::1 100 9 5 00:00:08 4 OS10# OS10(config)# interface ethernet 1/1/1 OS10(conf-if-eth1/1/1)# shutdown OS10(conf-if-eth1/1/1)# do show ip bgp summary BGP router identifier 11.11.11.11 local AS number 300 Neighbor AS MsgRcvd MsgSent Up/Down State/Pfx 3.1.1.1 100 7 4 00:00:29 3 3::1 100 9 5 00:00:29 4 OS10(conf-if-eth1/1/1)# OS10(config-router-bgp-neighbor-af)# Apr 27 01:39:03 OS10 dn_sm[2065]: Node.1-Unit.1:PRI:alert [os10:event], %Dell EMC (OS10) %BGP_NBR_BKWD_STATE_CHG: Backward state change occurred Hold Time expired for Nbr:3.1.1.3 VRF:default Apr 27 01:39:03 OS10 dn_sm[2065]: Node.1-Unit.1:PRI:alert [os10:event], %Dell EMC (OS10) %BGP_NBR_BKWD_STATE_CHG: Backward state change occurred Hold Time expired for Nbr:3::3 VRF:default Passive peering When you enable a peer-template, the system sends an OPEN message to initiate a TCP connection. If you enable passive peering for the peer template, the system does not send an OPEN message but responds to an OPEN message. When a BGP neighbor connection with authentication rejects a passive peer-template, the system prevents another passive peer-template on the same subnet from connecting with the BGP neighbor. To work around this constraint, change the BGP configuration or change the order of the peer template configuration. You can restrict the number of passive sessions the neighbor accepts using the limit command. 1 Enable BGP and assign the AS number to the local BGP speaker in CONFIGURATION mode (1 to 65535 for 2-byte, 1 to 4294967295 for 4-byte). router bgp as-number 2 Configure a template that does not initiate TCP connections with other peers in ROUTER-BGP mode. A maximum of 16 characters. template template-name 3 Create and enter the AS number for the remote neighbor in ROUTER-BGP-TEMPLATE mode (1 to 4294967295). remote-as as-number Layer 3 449