Dell PowerSwitch S5212F-ON OS10 Enterprise Edition User Guide Release 10.4.3.0 - Page 1159

location-led interface Changes the location LED of the interface. Syntax Parameters location-led interface ethernet {chassis/slot/port[:subport]} {on | off} • chassis/slot/port[:subport] - Enter the ethernet interface number. • on | off - Set the interface LED to be on or off. Default Command Mode Usage Information Example Not configured EXEC Use this command to change the location LED for the specified interface. OS10# location-led interface ethernet 1/1/1 on OS10# location-led interface ethernet 1/1/1 off Supported Releases 10.3.0E or later location-led system Changes the location LED of the system. Syntax Parameters location-led system {node-id | node-id/unit-id} {on | off} • node-id | node-id/unit-id - Enter the system ID. • on | off - Set the system LED to be on or off. Default Command Mode Usage Information Example Not configured EXEC Use this command to change the location LED for the specified system ID. OS10# location-led system 1 on OS10# location-led system 1 off Supported Releases 10.3.0E or later ping Tests network connectivity to an IPv4 device. Syntax ping [vrf {management | vrf-name}] [-4] [-aAbBdDfhLnOqrRUvV] [-c count] [-i interval] [-I interface] [-m mark] [-M pmtudisc_option] [-l preload] [-p pattern] [-Q tos] [-s packetsize] [-S sndbuf] [-t ttl] [-T timestamp_option] [w deadline] [-W timeout] [hop1 ...] destination Parameters • vrf management - (Optional) Pings an IPv4 address in the management virtual routing and forwarding (VRF) instance. • vrf vrf-name - (Optional) Ping an IP address in a specified VRF instance. Troubleshoot OS10 1159