Dell PowerSwitch S5212F-ON OS10 Enterprise Edition User Guide Release 10.4.3.0 - Page 471

Parameters Default Command Mode route-map route-map-name-(Optional) Enter a route-map name. A maximum of 140 characters. Enabled ROUTER-BGP-NEIGHBOR-AF ROUTER-TEMPLATE-AF Usage Information Example The no version of this command removes the default route. OS10(conf-router-bgp-10)# template lunar OS10(conf-router-bgp-template)# address-family ipv6 unicast OS10(conf-router-template-af)# default-originate route-map rmap-bgp Supported Releases 10.4.1.0 or later distance bgp Sets the administrative distance for BGP routes. Syntax distance bgp external-distance internal-distance local-distance Parameters • external-distance-Enter a number to assign to routes learned from a neighbor external to the AS, from 1 to 255. • internal-distance-Enter a number to assign to routes learned from a router within the AS, from 1 to 255. • local-distance-Enter a number to assign to routes learned from networks listed in the network command, from 1 to 255. Defaults • external-distance-20 • internal-distance-200 • local-distance-200 Command Modes • CONFIG-ROUTER-BGP-ADDRESS-FAMILY • CONFIG-ROUTER-BGP-VRF-ADDRESS-FAMILY Usage Information Examples This command is used to configure administrative distance for eBGP route, iBGP route, and local BGP route. Administrative distance indicates the reliability of the route; the lower the administrative distance, the more reliable the route is. Routes that are assigned an administrative distance of 255 are not installed in the routing table. Routes from confederations are treated as iBGP routes. Default VRF: IPv4 OS10# configure terminal OS10(config)# router bgp 100 OS10(config-router-bgp-100)# address-family ipv4 unicast OS10(configure-router-bgpv4-af)# distance bgp 10 200 210 IPv6 OS10# configure terminal OS10(config)# router bgp 100 Layer 3 471