Dell PowerSwitch S5212F-ON OS10 Enterprise Edition User Guide Release 10.4.3.0 - Page 1137

destination-group (telemetry) Configures a destination group for streaming telemetry. Syntax destination-group group-name Parameters group-name - Enter the name of the destination group. A maximum of 32 characters maximum. Default Not configured Command mode TELEMETRY Usage information A destination group defines the destination servers to which streaming telemetry data is sent. The no version of this command removes the configured group. Example OS10(conf-telemetry)# destination-group dest1 OS10(conf-telemetry-dg-dest1)# Supported releases 10.4.3.0 or later enable Enables telemetry on the switch. Syntax enable Parameters None Default Telemetry is disabled. Command mode TELEMETRY Usage information Enter the no enable command to disable telemetry. Example OS10(conf-telemetry)# enable Supported releases 10.4.3.0 or later encoding Configures the encoding format used to stream telemetry data to a destination device. Syntax encoding format Parameters format - Enter the gpb (Google protocol buffer) encoding format in which data is streamed. Default None Command mode SUBSCRIPTION-PROFILE Usage information The no version of the command removes the configured encoding format from a subscription profile. Example OS10(conf-telemetry)# subscription-profile subscription-1 OS10(conf-telemetry-sp-subscription-1)# encoding gpb Supported releases 10.4.3.0 or later Telemetry 1137