Dell PowerSwitch S5212F-ON OS10 Enterprise Edition User Guide Release 10.4.3.0 - Page 736

evpn Enables the EVPN control plane for VXLAN. Syntax Parameters Default Command mode Usage information Example evpn None Not configured CONFIGURATION Enabling EVPN triggers BGP to advertise EVPN capability with AFI=25 and SAFI=70 to all BGP peers in an autonomous system. The no version of this command disables EVPN on the switch. OS10(config)# evpn OS10(config-evpn)# Supported releases 10.4.2.0 or later rd Configures the Route Distinguisher (RD) value EVPN routes use. Syntax rd {A.B.C.D:[1-65535] | auto} Parameters A.B.C.D: [1-65535] Manually configure the RD with a 4-octet IPv4 address then a 2-octet-number, from 1-65535. auto Configure the RD to automatically generate. Default Command mode Usage information Example Not configured EVPN-EVI A RD maintains the uniqueness of an EVPN route between different EVPN instances. The RD auto-configures as Type 1 from the overlay network source IP address and the auto-generated EVPN instance ID. OS10(config)# evpn OS10(config-evpn)# evi 10 OS10(config-evpn-evi)# vni 10000 OS10(config-evpn-evi)# rd 111.111.111.111:65535 Supported releases 10.4.2.0 or later route-target Configures the Route Target (RT) values EVPN routes use. Syntax Parameters route-target {auto | value {import | export | both} [asn4]} value {import | export | both} Configure an RT import or export value, or both values, in the format 2-octet-ASN:4octet-number or 4-octet-ASN:2-octet-number. • The 2-octet ASN or number is 1 to 65535. 736 VXLAN