Dell S3840cdn Color Smart Printer Users Guide - Page 118

SSL/TLS Settings Configure the SSL/TLS settings. Select the protocol from SSL 3.0, TLS 1.0, TLS 1.1, and TLS 1.2. Device Certificate - Server Select a certificate for SSL/TLS communications. HTTP - SSL/TLS Communication Select whether or not to enable HTTP SSL/TLS communications. HTTP - SSL/TLS Port Number Set the port number used for HTTP SSL/TLS communication from 1 to 65535. The default value is 443. NOTE: • Do not use the numbers assigned to the other ports. LDAP - SSL/TLS Communication Set whether or not to enable the SSL/TLS communications for authentication and searches. If you enable the LDAP SSL/TLS communications, you must set IP Address/Host Name : Port and Backup IP Address/Host Name : Port under LDAP Servers/Directory Services. The port number for SSL/TLS communications of the LDAP directory server is normally set to 636. SMTP - SSL/TLS Communication Select the SSL/TLS communication from Disabled, STARTTLS (If Available), STARTTLS, and SSL/TLS. Device Certificate - Client Select a certificate for HTTP SSL/TLS communications. Verify Remote Server Certificate When the machine is operated as an SSL client, select whether or not to verify the certificate of the remote server. Port Settings Displays a list of available ports. To register a port, click Add. Add New Port Port Number Enter a port number. Port Type Select the type of the port. • Source • Destination Protocol Select the type of the protocol. • TCP • UDP IP Address Filtering Allows you to register IP addresses that can access the printer. NOTE: • Up to 25 IP addresses and IP masks can be added for each interface. 118 | Dell Printer Configuration Web Tool