Dell S3840cdn Color Smart Printer Users Guide - Page 187
-001 - 026-999, An error occurred. Contact Dell.
View all Dell S3840cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
Status Code Cause and Remedy 024-707 The paper type is not supported for duplex or inversion. Change the paper type, or change to 1-sided printing. 024-708 The paper type is not supported for duplex or inversion. Change the paper type, or change to face-up printing. 024-742 The number of pages exceeded the maximum number allowed for booklet creation. Change the printer properties setting to split the pages to create separate volumes, or to cancel the booklet creation setting. 024-746 The specified paper type is not compatible with the specified paper size, paper tray, output tray, or 2 sided printing. 024-747 The combination of the specified features such as Document Size, Paper Size, Paper Tray, 2 sided printing, and Output Tray is incompatible. 024-775 The number of pages exceeded the maximum number allowed for booklet creation. 024-910 A paper size mismatch error occurred on Tray 1. Make sure that the size of paper loaded in the tray is correct and that the paper guides are set correctly. 024-911 A paper size mismatch error occurred on Tray 2. Make sure that the size of paper loaded in the tray is correct and that the paper guides are set correctly. 024-923 The toner cartridge (yellow) is empty. Replace the toner cartridge with a new one. 024-924 The toner cartridge (magenta) is empty. Replace the toner cartridge with a new one. 024-925 The toner cartridge (cyan) is empty. Replace the toner cartridge with a new one. 024-933 Replace the drum cartridges. 024-940 024-941 024-947 The machine detected that Tray 2 was not installed. 024-950 Load the paper to Tray 1. 024-951 Load the paper to Tray 2. 024-954 Load the paper to the bypass tray. 024-958 The paper size specified for the job does not match the size of paper loaded in the bypass tray. Load the correct size of paper in the bypass tray. 024-959 The paper size specified for the job does not match the size of paper loaded in the bypass tray. Load the correct size of paper in the Tray 1. 024-960 The paper size specified for the job does not match the size of paper loaded in Tray 2. Load the correct size of paper in Tray 2. 024-965 The paper specified for printing is not loaded in the tray. 024-966 The paper specified for printing cannot be detected. Change the settings. 024-985 The bypass tray stopped running due to an obstruction. Check that the settings of paper size, orientation and paper type are correct. 025-596 An error occurred. Contact Dell. 025-597 "026-001" - "026-999" Status Code Cause and Remedy 026-400 Connect up to two devices to the USB host port. Turn off the printer, and turn it on again. 026-402 Wait until the job finishes. 026-703 Authentication was canceled when you added a document. Authenticate when documents are added. Understanding Printer Messages | 187