Dell S3840cdn Color Smart Printer Users Guide - Page 94

Device Certificate IKE SA Lifetime IPsec SA Lifetime DH Group PFS Specify Destination IPv4 Address Specify Destination IPv6 Address Communicate with Non-IPsec Devices LDAP Select a certificate for IPsec communications. Select a certificate when IKE Authentication Method is set to Digital Signature. A self-signed certificate created by Dell Printer Configuration Web Tool cannot be used. Specify IKE SA lifetime from 5 to 28800 minutes in 1 minute increments. NOTE: • The value must be equal to or greater than the value set in IPsec SA Lifetime. Specify IPSec SA lifetime from 300 to 172800 seconds in 1 second increments. NOTE: • The value must be equal to or smaller than the value set in IKE SA Lifetime. Set DH group. Select from G1, G2, and G14. Select whether or not to enable PFS. Set the IPv4 address of the destination. When entering an IP address, enter the address in the format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value from 0 to 255. Set the IPv6 address of the destination. When entering an IP address, enter the address in the format "xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx", where "xxxx" is a hexadecimal value. Select whether or not to communicate with non-IPSec devices. LDAP Servers Server Information IP Address/Host Name : Port Backup IP Address/Host Name : Port Enter the server IP address and the port number. NOTE: • For IPv4, enter the address in the format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value from 0 to 255. • For IPv6, enter the address in the format "xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx", where "xxxx" is a hexadecimal value. Enter the backup server IP address and the port number. NOTE: • For IPv4, enter the address in the format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value from 0 to 255. • For IPv6, enter the address in the format "xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx", where "xxxx" is a hexadecimal value. 94 | Dell Printer Configuration Web Tool