Dell Vostro 5402 Service Manual - Page 103
Security, Table 8. Power Management continued, Table 9. Security
View all Dell Vostro 5402 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Table 8. Power Management (continued) Option Description Use ExpressCharge for accelerated battery charging. Peak Shift Allows the system to run on battery during peak power usage hours. Peak Shift - By default, this option is disabled. NOTE: The user can: ● Set Battery Threshold Min = 15, Max = 100 ● Prevent AC power between certain times of the day using Peak Shift Start, Peak Shift End, and Peak Shift Charge Start. Thermal Management Allows cooling of fans and the processor heat management to adjust system performance, noise, and temperature. The options are: ● Optimized-enabled by default ● Cool ● Quiet ● Ultra Performance USB Wake Support Wake on Dell USB-C Dock Allows you to connect a Dell USB-C Dock to wake the system from standby mode. By default, the option Wake on Dell USB-C Dock is enabled. NOTE: These features are only functional when the AC power adapter is connected. If the AC power adapter is removed before Standby, the BIOS removes power from all USB ports to conserve battery power. Block Sleep This option enables you to block entering to sleep (S3) mode in operating system environment. By default, the Block Sleep option is disabled. NOTE: When Block Sleep is enabled, the system does not go to sleep. Intel Rapid Start gets disabled automatically, and the operating system power option remains blank if it was set to Sleep. Lid Switch Allows you to disable the lid switch. The options are: ● Enable Lid Switch-enabled by default ● Power On Lid Open-enabled by default Intel Speed Shift technology Allows you to enable or disable the Intel Speed Shift Technology support. By default,Intel Speed Shift technology is enabled. Enabling this option allows the operating system to select appropriate processor performance. Security Table 9. Security Option TPM 2.0 Security Description Allows you to enable or disable the Trusted Platform Module (TPM). The options are: ● TPM 2.0 Security On-This option is enabled by default. ● PPI Bypass for Enable Commands System setup 103