Dell Vostro 5402 Service Manual - Page 58
Install the, Place the mylar cover back.
![]() |
View all Dell Vostro 5402 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Steps 1. Place the I/O board on the palm-rest and keyboard assembly. 2. Align the screw holes on the I/O board with the screw holes on the palm-rest and keyboard assembly. 3. Replace the three screws (M2x3) that secure the I/O board to the palm-rest and keyboard assembly. 4. Connect the fingerprint reader cable to the I/O board and close the latch to secure the cable. 5. Lower the left hinge, and replace the two screws (M2.5x4) and (M2x3). 6. Route the I/O cable underneath the system fan using adhesive tape. 7. Connect the I/O-board cable to the I/O board and close the latch to secure the cable. 8. Place the mylar cover back. Next steps 1. Install the coin-cell battery. 2. Install the system fan. 3. Install the battery (3-cell or 4-cell) based on the configuration. 4. Install the base cover. 5. Follow the procedure in after working inside your computer. 58 Disassembly and reassembly
![](/manual_guide/products/dell-vostro-5402-service-manual-737d4f2/58.png)