Dell Vostro 5402 Service Manual - Page 49
Installing the system fan - discrete
![]() |
View all Dell Vostro 5402 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
3. Peel the adhesive tape, and unroute the I/O cable. 4. Remove the two (M2x2) screws that secure the system fan to the palm-rest and keyboard assembly. 5. Slide and lift the system fan off the palm-rest and keyboard assembly. Installing the system fan - discrete Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The figure indicates the location of the system fan and provides a visual representation of the installation procedure. Steps 1. Slide and place the system fan on the palm-rest and keyboard assembly. 2. Align the screw holes on the system fan with the screw holes on the palm-rest and keyboard assembly. 3. Replace the two (M2x2) screws to secure the system fan to the palm-rest and keyboard assembly. 4. Connect the system fan cable to the system board. 5. Route the I/O cable underneath the system fan and connect it to the system board. Disassembly and reassembly 49
![](/manual_guide/products/dell-vostro-5402-service-manual-737d4f2/49.png)