Dell Vostro 5402 Service Manual - Page 34
Removing the M.2 2280 solid-state drive - SSD-1 - discrete
![]() |
View all Dell Vostro 5402 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Steps 1. Align the solid-state drive bracket to accommodate the M.2 2230 solid-state drive. 2. Replace the single (M2x3) screw to secure the solid-state drive module to the palm-rest and keyboard assembly. Next steps 1. Connect the battery (3-cell or 4-cell) based on the configuration. 2. Install the base cover. 3. Follow the procedure in after working inside your computer. Removing the M.2 2280 solid-state drive - SSD-1 - discrete Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the base cover. 3. Disconnect the battery (3-cell or 4-cell). About this task NOTE: Depending on the configuration ordered, your computer may support a 2230 solid-state drive or a 2280 solid-state drive in M.2 slot one. NOTE: M.2 slot two supports one PCIe Gen3 x4 NVMe or SATA solid-state drive (M.2 2230 or M.2 2280) or one Intel Optane memory H10 with solid state storage. The figure indicates the location of the M.2 2280 solid-state drive in slot one and provides a visual representation of the removal procedure. 34 Disassembly and reassembly
![](/manual_guide/products/dell-vostro-5402-service-manual-737d4f2/34.png)