Dell Vostro 5402 Service Manual - Page 66
Removing the DC-in port - discrete
![]() |
View all Dell Vostro 5402 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Steps 1. Place the DC-in port on the palm-rest and keyboard assembly. 2. Replace the single screw (M2x3) on the DC-in port using bracket. 3. Connect the DC-in cable to the system board. 4. Adhere the transparent sticker. 5. Lower the metal hinge. 6. Replace the two (M2.5x4) screws, and tighten it. Next steps 1. Install the battery (3-cell or 4-cell) based on the configuration. 2. Install the base cover. 3. Follow the procedure in after working inside your computer. Removing the DC-in port - discrete Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the base cover. 3. Remove the battery (3-cell or 4-cell). 66 Disassembly and reassembly
![](/manual_guide/products/dell-vostro-5402-service-manual-737d4f2/66.png)
Steps
1.
Place the DC-in port on the palm-rest and keyboard assembly.
2.
Replace the single screw (M2x3) on the DC-in port using bracket.
3.
Connect the DC-in cable to the system board.
4.
Adhere the transparent sticker.
5.
Lower the metal hinge.
6.
Replace the two (M2.5x4) screws, and tighten it.
Next steps
1.
Install the battery (
3-cell
or
4-cell
) based on the configuration.
2.
Install the
base cover
.
3.
Follow the procedure in
after working inside your computer
.
Removing the DC-in port - discrete
Prerequisites
1.
Follow the procedure in
before working inside your computer
.
2.
Remove the
base cover
.
3.
Remove the battery (
3-cell
or
4-cell
).
66
Disassembly and reassembly