Dell Vostro 5402 Service Manual - Page 76

Removing the display assembly - discrete

Get Dell Vostro 5402 PDF manuals and user guides View all Dell Vostro 5402 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 76 highlights

Steps 1. Place the display assembly on a clean and flat surface. 2. Align and place the palm-rest and keyboard assembly on the display assembly. 3. Using the alignment posts, close the display hinges. 4. Replace the two screws (M2.5x4) and (M2x3) that secure the left-display hinge to the system board. 5. Replace the two screws (M2.5x4) that secure the right-display hinge to the system board. 6. Connect the display cable on to the connector on the system board and adhere the tape to the system board. Next steps 1. Install the WLAN card. 2. Install the battery (3-cell or 4-cell) based on the configuration. 3. Install the base cover. 4. Follow the procedure in after working inside your computer. Removing the display assembly - discrete Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the base cover. 3. Remove the battery (3-cell or 4-cell). 4. Remove the WLAN card. About this task The figure indicates the location of the display assembly and provides a visual representation of the removal procedure. 76 Disassembly and reassembly

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
Steps
1.
Place the display assembly on a clean and flat surface.
2.
Align and place the palm-rest and keyboard assembly on the display assembly.
3.
Using the alignment posts, close the display hinges.
4.
Replace the two screws (M2.5x4) and (M2x3) that secure the left-display hinge to the system board.
5.
Replace the two screws (M2.5x4) that secure the right-display hinge to the system board.
6.
Connect the display cable on to the connector on the system board and adhere the tape to the system board.
Next steps
1.
Install the
WLAN card
.
2.
Install the battery (
3-cell
or
4-cell
) based on the configuration.
3.
Install the
base cover
.
4.
Follow the procedure in
after working inside your computer
.
Removing the display assembly - discrete
Prerequisites
1.
Follow the procedure in
before working inside your computer
.
2.
Remove the
base cover
.
3.
Remove the battery (
3-cell
or
4-cell
).
4.
Remove the
WLAN card
.
About this task
The figure indicates the location of the display assembly and provides a visual representation of the removal procedure.
76
Disassembly and reassembly