Dell Vostro 5402 Service Manual - Page 43
Removing the speakers (in 4-cell battery configuration
![]() |
View all Dell Vostro 5402 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Steps 1. Using the alignment posts and rubber grommets, place the speakers in the slots on the palm-rest and keyboard assembly. 2. Route the speaker cable through the routing guides on the palm-rest and keyboard assembly. 3. Connect the speaker cable to the system board. Next steps 1. Install the battery (3-cell or 4-cell) based on the configuration. 2. Install the base cover. 3. Follow the procedure in after working inside your computer. Removing the speakers (in 4-cell battery configuration) Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the base cover. 3. Remove the battery (3-cell or 4-cell). Disassembly and reassembly 43
![](/manual_guide/products/dell-vostro-5402-service-manual-737d4f2/43.png)
Steps
1.
Using the alignment posts and rubber grommets, place the speakers in the slots on the palm-rest and keyboard assembly.
2.
Route the speaker cable through the routing guides on the palm-rest and keyboard assembly.
3.
Connect the speaker cable to the system board.
Next steps
1.
Install the battery (
3-cell
or
4-cell
) based on the configuration.
2.
Install the
base cover
.
3.
Follow the procedure in
after working inside your computer
.
Removing the speakers (in 4-cell battery configuration)
Prerequisites
1.
Follow the procedure in
before working inside your computer
.
2.
Remove the
base cover
.
3.
Remove the battery (
3-cell
or
4-cell
).
Disassembly and reassembly
43