Dell Vostro 5402 Service Manual - Page 64
DC-in port, Removing the DC-in port - UMA
View all Dell Vostro 5402 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
About this task The figure indicates the location of the power button with fingerprint reader and provides a visual representation of the installation procedure. Steps 1. Using the alignment post, place the power button with fingerprint reader on the palm-rest and keyboard assembly. 2. Replace the two screws (M2x2.5) to secure the power button with optional fingerprint reader to the palm-rest and keyboard assembly. 3. Plug the I/O cable into the connector on palm-rest and keyboard assembly and close the latch. 4. Plug the fingerprint reader cable into the connector on palm-rest and keyboard assembly. Next steps 1. Install the I/O board. 2. Install the system fan. 3. Install the coin-cell battery. 4. Install the M.2 2280 SSD card or M.2 2230 SSD card. 5. Install the battery (3-cell or 4-cell) based on the configuration. 6. Install the base cover. 7. Follow the procedure in after working inside your computer. DC-in port Removing the DC-in port - UMA Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the base cover. 3. Remove the battery (3-cell or 4-cell). 64 Disassembly and reassembly