Dell Vostro 5402 Service Manual - Page 28
Removing the memory modules - discrete, Steps, Next steps, Prerequisites
View all Dell Vostro 5402 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Steps 1. Lift the mylar, and align the notch on the memory module with the tab on the memory-module slot. 2. Slide the memory module firmly into the slot at an angle. 3. Press the memory module down until it clicks into place. NOTE: If you do not hear the click, remove the memory module and reinstall it. Next steps 1. Connect the battery (3-cell or 4-cell) based on the configuration. 2. Install the base cover. 3. Follow the procedure in after working inside your computer. Removing the memory modules - discrete Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the base cover. 3. Disconnect the battery (3-cell or 4-cell). 28 Disassembly and reassembly
Steps
1.
Lift the mylar, and align the notch on the memory module with the tab on the memory-module slot.
2.
Slide the memory module firmly into the slot at an angle.
3.
Press the memory module down until it clicks into place.
NOTE:
If you do not hear the click, remove the memory module and reinstall it.
Next steps
1.
Connect the battery (
3-cell
or
4-cell
) based on the configuration.
2.
Install the
base cover
.
3.
Follow the procedure in
after working inside your computer
.
Removing the memory modules - discrete
Prerequisites
1.
Follow the procedure in
before working inside your computer
.
2.
Remove the
base cover
.
3.
Disconnect the battery (
3-cell
or
4-cell
).
28
Disassembly and reassembly