Dell Vostro 5402 Service Manual - Page 40
Installing the M.2 2280 solid-state drive - SSD-2 - discrete
![]() |
View all Dell Vostro 5402 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Steps 1. Remove the single screw (M1.6x2) that secures the solid-state drive module support bracket to the palm-rest and keyboard assembly. 2. Lift and remove the solid-state drive support bracket from the solid-state drive slot. 3. Remove the single screw (M2x3) that secures the solid-state drive module to the palm-rest and keyboard assembly. 4. Slide and remove the solid-state drive module from the solid-state drive slot. Installing the M.2 2280 solid-state drive - SSD-2 - discrete Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. NOTE: Slot two supports both M.2 2230 and M.2 2280 SSD. NOTE: If you have ordered a 3-cell (40 Wh) battery configuration, your computer can only support one SSD in M.2 slot one. M.2 slot two is only available if you have ordered an Intel Optane storage. NOTE: If you have ordered a 4-cell (53 Wh) battery configuration, your computer may support a 2230 solid-state drive or a 2280 solid-state drive or an Intel Optane storage in M.2 slot two. NOTE: If there is only one solid-state drive in the configuration you ordered, you can install another solid-state drive in the other M.2 slot. However, you may need a solid-state drive bracket (sold separately) to install the additional solid-state drive. NOTE: This procedure applies only to computers shipped with a 2280 solid-state drive installed in M.2 slot two. About this task The figure indicates the location of the solid-state drive support bracket and provides a visual representation of the bracket alignment procedure to accommodate the M.2 2280 solid-state drive from slot two. 40 Disassembly and reassembly
![](/manual_guide/products/dell-vostro-5402-service-manual-737d4f2/40.png)