Dell Vostro 5402 Service Manual - Page 70
Installing the touchpad - UMA
![]() |
View all Dell Vostro 5402 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Installing the touchpad - UMA Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The figure indicates the location of the component and provides a visual representation of the installation procedure. Steps 1. Align and place the touchpad into the slot on the palm-rest and keyboard assembly. 2. Replace the two (M2x2) screws along with the bracket to secure the touchpad to the palm-rest and keyboard assembly. 3. Slide the touchpad cable onto its connector on the system board and close the latch to secure the cable. 4. Align and place the touchpad bracket into the slot on the palm-rest and keyboard assembly. 5. Replace the three (M1.6x2) screws that secure the touchpad bracket to the palm-rest and keyboard assembly. 6. Lower the latch of the touchpad cable once it is connected to the connector on the system board. Next steps 1. Install the speakers (3-cell battery configuration or 4-cell battery configuration). 70 Disassembly and reassembly
![](/manual_guide/products/dell-vostro-5402-service-manual-737d4f2/70.png)