Dell Vostro 5402 Service Manual - Page 73
Display assembly, Removing the display assembly - UMA
View all Dell Vostro 5402 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
4. Align and place the touchpad bracket into the slot on the palm-rest and keyboard assembly. 5. Replace the three (M1.6x2) screws that secure the touchpad bracket to the palm-rest and keyboard assembly. 6. Lower the latch on the touchpad cable once it is connected to the connector on the system board. Next steps 1. Install the speakers (3-cell battery configuration or 4-cell battery configuration). 2. Install the battery (3-cell or 4-cell) based on the configuration. 3. Install the base cover. 4. Follow the procedure in after working inside your computer. Display assembly Removing the display assembly - UMA Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the base cover. 3. Remove the battery (3-cell or 4-cell). 4. Remove the WLAN card. About this task The figure indicates the location of the display assembly and provides a visual representation of the removal procedure. Disassembly and reassembly 73