Dell Vostro 5402 Service Manual - Page 81
System board, Removing the system board - UMA
View all Dell Vostro 5402 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Steps 1. Place the display assembly on a clean and flat surface. 2. Align and place the palm-rest and keyboard assembly on the display assembly. 3. Using the alignment posts, close the display hinges. 4. Replace the two screws (M2.5x4) and (M2x3) that secure the left-display hinge to the system board. 5. Replace the two screws (M2.5x4) that secure the right-display hinge to the system board. 6. Connect the display cable on to the connector on the system board and adhere the tape to the system board. Next steps 1. Install the WLAN card. 2. Install the battery 3-cell or 4-cell. 3. Install the base cover. 4. Follow the procedure in after working inside your computer. System board Removing the system board - UMA Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the base cover. 3. Remove the battery (3-cell or 4-cell). 4. Remove the coin-cell battery. Disassembly and reassembly 81