Dell W-Series 207 Instant 6.5.1.0-4.3.1.0 User Guide - Page 119
Network assigned
View all Dell W-Series 207 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Table 25: IP and VLAN Assignment for WLAN SSID Clients Client IP Assignment Client VLAN Assignment Virtual Controller assigned If the Virtual Controller assigned is selected for client IP assignment, the VC creates a private subnet and VLAN on the W-IAP for the wireless clients. The network address translation for all client traffic that goes out of this interface is carried out at the source. This setup eliminates the need for complex VLAN and IP address management for a multi-site wireless network. On selecting this option, the following client VLAN assignment options are displayed: l Default: When selected, the default VLAN as determined by the VC is assigned for clients. l Custom: When selected, you can specify a custom VLAN assignment option. You can select an existing DHCP scope for client IP and VLAN assignment or you can create a new DHCP scope by selecting New. For more information on DHCP scopes, see Configuring DHCP Scopes on page 207. Network assigned If the Network assigned is selected, you can specify any of the following options for the Client VLAN assignment. l Default-On selecting this option, the client obtains the IP address in the same subnet as the W-IAPs. By default, the client VLAN is assigned to the native VLAN on the wired network. l Static-On selecting this option, you need to specify a single VLAN, a comma separated list of VLANS, or a range of VLANs for all clients on this network. Select this option for configuring VLAN pooling. l Dynamic-On selecting this option, you can assign the VLANs dynamically from a Dynamic Host Configuration Protocol (DHCP) server. To create VLAN assignment rules, click New to assign the user to a VLAN. In the New VLAN Assignment Rule window, enter the following information: l Attribute-Select an attribute returned by the RADIUS server during authentication. l Operator-Select an operator for matching the string. l String-Enter the string to match l VLAN-Enter the VLAN to be assigned. 9. Click Next to configure internal or external captive portal authentication, roles, and access rules for the guest users. If the client IP assignment mode is set to Network assigned in a guest SSID profile, the guest clients can log out of the captive portal network by accessing the https://securelogin.arubanetworks.com/auth/logout.html URL. In the CLI To configure WLAN settings for an SSID profile: (Instant AP)(config)# wlan ssid-profile (Instant AP)(SSID Profile )# essid (Instant AP)(SSID Profile )# type (Instant AP)(SSID Profile )# broadcast-filter (Instant AP)(SSID Profile )# dtim-period (Instant AP)(SSID Profile )# multicast-rate-optimization (Instant AP)(SSID Profile )# dynamic-multicast-optimization (Instant AP)(SSID Profile )# dmo-channel-utilization-threshold Dell Networking W-Series Instant 6.5.1.0-4.3.1.0 | User Guide Captive Portal for Guest Access | 119