Dell W-Series 207 Instant 6.5.1.0-4.3.1.0 User Guide - Page 50

Table 15: Types of Alerts Type of Alert Description Information Displayed Client Alerts The alert type, Client Alerts, occur when clients are connected to the Instant network. The alert type, Client Alert displays the following information: l Timestamp-Displays the time at which the client alert was recorded. l MAC address-Displays the MAC address of the client that caused the alert. l Description-Provides a short description of the alert. l Access Points-Displays the IP address of the W-IAP to which the client is connected. l Details-Provides complete details of the alert. Active Faults The Active Faults alerts occur in the event of a system fault. The Active Faults alerts consists of the following information: l Time-Displays the system time when an event occurs. l Number-Indicates the number of sequence. l Description-Displays the event details. Fault History The Fault History alerts display the historic system faults. The Fault History alert displays the following information: l Time-Displays the system time when an event occurs. l Number-Indicates the number of sequence. l Cleared by-Displays the module which cleared this fault. l Description-Displays the event details. The following figures show the client alerts, active faults, and fault history: Figure 18 Client Alerts Dell Networking W-Series Instant 6.5.1.0-4.3.1.0 | User Guide Instant User Interface | 50